Safe, Secure & Out The Way.
Installation Guide
1
Remove the 3M adhesive backing from the anti vibration pads and apply in place where ladder makes contact with the roof ribs.
2
Position the base brackets around 15cm outside the anti vibration pads and mark the holes.
3
Drill a 3mm pilot hole or use a centre punch to ensure accurate screw placement.
(Optional)
4
Attach the base plates to the roof ribs using the provided self tapping screws.
5
Slide the stud fitting into the base plate.
6
Assemble the ratchet straps and pull through the slack, leaving enough space for your ladder.
7
Insert your ladder and tighten the ratchet straps to secure in place.
